Fujian cooling tower manufacturers, Fujian Fujian cooling tower cooling towers Characteristics What are the characteristics of it? Quality really good? Cooling process equipment absorb heat so that the water temperature, and then discharged into rivers, lakes and the sea, this cooling method called direct cooling. When not have direct cooling conditions, we need to use cooling towers to cool. The role of the cooling tower is to mix the waste heat of cooling water in the tower with air heat exchange, so that heat is transferred to the air and scattered the atmosphere. Cooling tower high amplitude is the difference between the water temperature of the cooling tower of the theoretical cooling limit temperature. The smaller this value, the better the cooling effect. Excessively high amplitude decreases cooling, the cooling tower will increase the cost and form factor. In fact, the cooling tower of high amplitude usually take 3 ~ 5 ℃ can be. Fujian cooling tower is a widely used thermal equipment, and its role is to heat and mass transfer of the high-temperature cooling water heat scattered into the atmosphere, thus reducing the cooling water temperature, which depends mainly on the cold cold effect two fluids in the tower the mixing contact with water vapor partial pressure difference by means of a hot fluid partially evaporated between two streams and cool itself. When the cooling tower selection, specifically how to do ah? But there is a flow and access to water temperature can begin? Currently, it is known as a cold water cooling towers and air-cooled type two main forms. These two natural draft cooling towers have cooling towers and mechanical draft cooling towers. Since the cooling tower is mainly affected by air wet bulb temperature, depending on water evaporation and conduction to heat, so the consumption of water is very large. The air cooling towers using air heat conduction cooling is achieved, mainly affected by air dry bulb temperature.